Logic question

Russ

Jedi Master
A plane is standing on a runway that can move (some sort of conveyer belt). The plane moves in one direction, while the conveyer moves in the opposite direction. This conveyer has a control system that tracks the plane speed and tunes the speed of the conveyer to be exactly the same (but in the opposite direction).

Can the plane take off?

Discuss :D
 
Possibly, because lift is still being generated by the plane's aerofoil type features and engines. But maybe it will just fall down again.

Let's try it.
 
I don't think so.. In such situation the plane is motionless. It may use the full throtle of it's engines, but it would make no effect (apart from conveyor belt adjusting it's speed), because it is horizontal force. To lift the plane from the ground we need some vertical force, the constant flow of the air, which creates the high pressure under the wings and low pressure over the wings.
 
My initial thought was-

Get out of the airplane and change planes or simply fly.

Along the same lines- when does one decide to stop spinning wheels in the sand and go nowhere?

Cheryl
 
Dear Cecil:

Please, please, please settle this question. The discussion has been going on for ages, and any time someone mentions the words "airplane" or "conveyor belt" everyone starts right back up. Here's the original problem essentially as it was posed to us: "A plane is standing on a runway that can move (some sort of band conveyer). The plane moves in one direction, while the conveyer moves in the opposite direction. This conveyer has a control system that tracks the plane speed and tunes the speed of the conveyer to be exactly the same (but in the opposite direction). Can the plane take off?"

There are some difficulties with the wording of the problem, specifically regarding how we define speed, but the spirit of the situation is clear. The solution is also clear to me (and many others), but a staunch group of unbelievers won't accept it. My conclusion is that the plane does take off. Planes, whether jet or propeller, work by pulling themselves through the air. The rotation of their tires results from this forward movement, and has no bearing on the behavior of a plane during takeoff. I claim the only difference between a regular plane and one on a conveyor belt is that the conveyor belt plane's wheels will spin twice as fast during takeoff. Please, Cecil, show us that it's not only theoretically possible (with frictionless wheels) but it's actually possible too. --Berj A. Doudian, via e-mail

Cecil replies:

Excuse me--did I hear somebody say Monty Hall?

On first encounter this question, which has been showing up all over the Net, seems inane because the answer seems so obvious. However, as with the infamous Monty-Hall-three-doors-and-one-prize-problem (see The Straight Dope: "On Let's Make a Deal" you pick Door #1, 02-Nov-1990), the obvious answer is wrong, and you, Berj, are right--the plane takes off normally, with no need to specify frictionless wheels or any other such foolishness. You're also right that the question is often worded badly, leading to confusion, arguments, etc. In short, we've got a topic screaming for the Straight Dope.

First the obvious-but-wrong answer. The unwary tend to reason by analogy to a car on a conveyor belt--if the conveyor moves backward at the same rate that the car's wheels rotate forward, the net result is that the car remains stationary. An aircraft in the same situation, they figure, would stay planted on the ground, since there'd be no air rushing over the wings to give it lift. But of course cars and planes don't work the same way. A car's wheels are its means of propulsion--they push the road backwards (relatively speaking), and the car moves forward. In contrast, a plane's wheels aren't motorized; their purpose is to reduce friction during takeoff (and add it, by braking, when landing). What gets a plane moving are its propellers or jet turbines, which shove the air backward and thereby impel the plane forward. What the wheels, conveyor belt, etc, are up to is largely irrelevant. Let me repeat: Once the pilot fires up the engines, the plane moves forward at pretty much the usual speed relative to the ground--and more importantly the air--regardless of how fast the conveyor belt is moving backward. This generates lift on the wings, and the plane takes off. All the conveyor belt does is, as you correctly conclude, make the plane's wheels spin madly.

A thought experiment commonly cited in discussions of this question is to imagine you're standing on a health-club treadmill in rollerblades while holding a rope attached to the wall in front of you. The treadmill starts; simultaneously you begin to haul in the rope. Although you'll have to overcome some initial friction tugging you backward, in short order you'll be able to pull yourself forward easily.

As you point out, one problem here is the wording of the question. Your version straightforwardly states that the conveyor moves backward at the same rate that the plane moves forward. If the plane's forward speed is 100 miles per hour, the conveyor rolls 100 MPH backward, and the wheels rotate at 200 MPH. Assuming you've got Indy-car-quality tires and wheel bearings, no problem. However, some versions put matters this way: "The conveyer belt is designed to exactly match the speed of the wheels at any given time, moving in the opposite direction of rotation." This language leads to a paradox: If the plane moves forward at 5 MPH, then its wheels will do likewise, and the treadmill will go 5 MPH backward. But if the treadmill is going 5 MPH backward, then the wheels are really turning 10 MPH forward. But if the wheels are going 10 MPH forward . . . Soon the foolish have persuaded themselves that the treadmill must operate at infinite speed. Nonsense. The question thus stated asks the impossible -- simply put, that A = A + 5 -- and so cannot be framed in this way. Everything clear now? Maybe not. But believe this: The plane takes off.

--CECIL ADAMS http://www.straightdope.com/columns/060203.html
 
Yeah, the wheels are there to reduce friction from the plane going forwards. If the plane is thrusting forwards on this conveyor, the wheels just spin faster. The plane gets its thrust from the jet/prop engines and so the conveyor would make no (or very little) difference - the plane would still move at the same speed because its not relying on the conveyor for traction (it doesn't use the wheels to push it along, but the air which is free from the conveyors influence).

Its not really a trick question, but the first thing many people think of is that the wheels are what pushes a plane along, like a car, instead of the jet/prop engines. On the forum where I found this, there were people arguing against the facts until they were blue in the face, and even caps lock was used a few times :) And lots of people weren't saying "maybe" or "I think" if they didn't know the answer either, some were certain of the facts even though they were wrong. I suppose it is still a tricky one to prove to someone if they don't know how a plane works though.
 
A plane is standing on a runway. . .

A plane is standing on a runway that can move (some sort of band conveyer). The plane moves in one direction, while the conveyer moves in the opposite direction. This conveyer has a control system that tracks the plane speed and tunes the speed of the conveyer to be exactly the same (but in the opposite direction). Can the plane take off?

You can Google it if you want but think about it first and try to answer and give others a chance to try.
 
Hi mugatea,

This was discussed before and as you can see, I've merge your post to the original. :)
 
Russ said:
Yeah, the wheels are there to reduce friction from the plane going forwards. If the plane is thrusting forwards on this conveyor, the wheels just spin faster. The plane gets its thrust from the jet/prop engines and so the conveyor would make no (or very little) difference - the plane would still move at the same speed because its not relying on the conveyor for traction (it doesn't use the wheels to push it along, but the air which is free from the conveyors influence).

Its not really a trick question, but the first thing many people think of is that the wheels are what pushes a plane along, like a car, instead of the jet/prop engines. On the forum where I found this, there were people arguing against the facts until they were blue in the face, and even caps lock was used a few times :) And lots of people weren't saying "maybe" or "I think" if they didn't know the answer either, some were certain of the facts even though they were wrong. I suppose it is still a tricky one to prove to someone if they don't know how a plane works though.

This is correct. Mythbusters even tested it _http://mythbustersresults.com/episode97

I don't know why anyone would continue to think differently once they understand that the wheels do not drive a plane.
 
Back
Top Bottom