A question about the control over free energy in the times ahead

Inquorate said:
Once I have another unit, I will be able to fix the old one if I can find the parts. They cost up to $4,000 but I'm hoping I can find one for less than $2k.
Click to expand...
Hi,
Noticing the frequencies are relatively low, have you considered using a PC-based SA? Just look at this example, 1Hz to 5GHz, clearly overkill for your application, but it sells for $599.
http://www.edn.com/electronics-blogs/the-emc-blog/4410523/Review--Amazing-USB-5-35-GHz-spectrum-analyzer
Other sub-Ghz units cost less that $200.
Another even simpler possibility is a frequency counter and an oscilloscope.
Good luck
.A
 
I had a unit similar to that, and another guy I spoke to online was using one as well. Mine stopped working. Some of us lost PC's and other electronic equipment. That's the problem with shaking the atomic lattice; you hit the resonant point of components and they go *poof*

This time around I want an analog style spectrum analyser, so I can pick up resonance without outside stimulation. The digital ones seem to average out a lot of noise so you don't really know what is happening. You crank up the power to see it and something goes *poof*

Which can be quite expensive..
 
I should qualify that the spectrum analyser I purchased with the faulty PSU was a pre-existing fault. he problem with them is they've been around since the 80's and were mostly used as workhorses, plugged in 24/7

They don't build them like they used to
 
If only we lived closer together! :) I've been dabbling with this line of research as well. And I too am in the market for an oscilloscope and/or a spectrum analyzer. It's is a shame that this equipment is so expensive. :(. (currently I am looking into alternative avenues such as ic555 timer circuits and/or arduino. Because it may be cheaper to build your own tools. I am very much a newcomer when it comes to circuits though :-[ )

C's Session said:
Q: (L) Next? (Menrva) [To trendsetter37] Do you want to ask about the stuff we were talking about earlier, about teleportation and your other ideas?

A: Wait for 4D for that!

Q: (Perceval) We didn't even hear what you were talking about. We didn't even know what the question was, and that was the answer. (Chu) We didn't hear you. (L) What was the question? (Menrva) We had an interesting discussion around the breakfast table this morning involving really interesting questions... This guy [trendsetter37] is really brilliant. We were just talking about if we should post on the forum for feedback and sharing ideas and stuff, so... That's what that was about. (trendsetter37) I'll make a post about the conversation. Is it safe to discuss the topics we discussed this morning on the forum, or in a more private nature in person?

A: Wait for communications system to be installed and group environment that erects a barrier of safety.

Q: (L) In short, be circumspect, I think. ...
Click to expand...

This was kind of a surprise for me because I wasn't really expecting it to come up for the session. But the conversation at the table prior to the session was mostly about electronic resonance being the key for a variety of useful phenomena. The teleportation bit came up as a corollary to the topic really. So yea i'm not sure if they were specifically referring to 'teleportation' only or the other topics which did include producing or capturing energy from the environment through resonance as well as some aspects of matter transmutation. Which I think would be useful in the times ahead.

What are the specs on your PSU?

Also I'm looking forward to watching those videos today thanks for posting.
 
trendsetter37 said:
If only we lived closer together! :) I've been dabbling with this line of research as well. And I too am in the market for an oscilloscope and/or a spectrum analyzer. It's is a shame that this equipment is so expensive. :(. (currently I am looking into alternative avenues such as ic555 timer circuits and/or arduino. Because it may be cheaper to build your own tools. I am very much a newcomer when it comes to circuits though :-[ )

C's Session said:
Q: (L) Next? (Menrva) [To trendsetter37] Do you want to ask about the stuff we were talking about earlier, about teleportation and your other ideas?

A: Wait for 4D for that!

Q: (Perceval) We didn't even hear what you were talking about. We didn't even know what the question was, and that was the answer. (Chu) We didn't hear you. (L) What was the question? (Menrva) We had an interesting discussion around the breakfast table this morning involving really interesting questions... This guy [trendsetter37] is really brilliant. We were just talking about if we should post on the forum for feedback and sharing ideas and stuff, so... That's what that was about. (trendsetter37) I'll make a post about the conversation. Is it safe to discuss the topics we discussed this morning on the forum, or in a more private nature in person?

A: Wait for communications system to be installed and group environment that erects a barrier of safety.

Q: (L) In short, be circumspect, I think. ...
Click to expand...

This was kind of a surprise for me because I wasn't really expecting it to come up for the session. But the conversation at the table prior to the session was mostly about electronic resonance being the key for a variety of useful phenomena. The teleportation bit came up as a corollary to the topic really. So yea i'm not sure if they were specifically referring to 'teleportation' only or the other topics which did include producing or capturing energy from the environment through resonance as well as some aspects of matter transmutation. Which I think would be useful in the times ahead.

What are the specs on your PSU?

Also I'm looking forward to watching those videos today thanks for posting.
Click to expand...

I guess C's meant telepathy and not teleportation.
 
Hi trendsetter :-)

If only indeed! There are a couple of people worldwide that I'd like to spend a couple of weeks with, working on this..

I ended up finding a replacement part for the dead component in my PSU, it's coming from Hong Kong.

However, I also found the cheapest agilent 8591A Spectrum Analyzer in Germany. Here's the link and with it all the unit specs.

We'll no doubt talk. The oscilloscope needs a tracker /marker and fft (fast fourier transform) I've got an atten ads 1102cal and my signal generator is standing Standig sag 450

You could get set up for 2 - 3 thousand US$

_http://www.used-line.com/analyzers/frequency/agilent-hp-8591a/item-9614762


Mod's note: Edited to do a correction as suggested by the author of the post.
 
That does look really nice! But I don't have that kind of money :(. I am planning on paying a visit to a couple of universities around here that I have some ties with. Usually they throw things out when they are too old or don't use them anymore. Or so I hope because that's how it was in the Chemistry department sometimes.
 
Perhaps this may help, search: "Used tektronix surplus" and "Used tektronix spectrum analyzer surplus"
 
obyvatel said:
Hi Inquorate,
What is this about?
Click to expand...

I merged the thread about the correction that Inquorate wanted to do with that thread where the mistake was.
 
You must log in or register to reply here.

Trending content

Back
Top Bottom