Wow LQB! I'm so glad you clarified about the shielding around the wires not being effective! For me, this article was misleading. I knew a shield on the outside of the wall wouldn't do anything for the mag field but thought this other solution would.
Once again things have turned around for the better. A second reading in the room is showing mainly .5 readings with slightly above or below in some areas. The small bed in that room, pings occasionally around the frame which is metal so that will be replaced with a wood one. It looks like I made a mistake when I reported the 2-3 mG readings here but I'll check it for the 3rd time or 4th. My explanation for this mistake in reporting is, it had been a long day and I was tired. I searched my mind for the readings I had taken earlier, knew the dial registered 2 to 3 lines and I said 2-3 mG here. I had also turned off the sound on the meter which would have alerted me to a high field. Its embarrassing really and I created drama where it didn't need to be. My apologizes to those here for my spaced out reporting. I really must be more careful with these things. I did receive help and support from a few others. The man doing the work is more knowledgeable and open then I thought and my daughters father got involved as well. Its good to have others involved and shows the great benefits of networking and not trying to do all by myself (my tendency). What I've learned is being passed around and others are now looking at their homes in new ways.
The water heater has no wires going to it because its gas. Things are looking up once again and many things have been learned. One being, my tendency to become paranoid over protecting these children.
Looking closely at the GreenWave meters now which will be a very good investment for this small, old home with kids.
Thank you Everyone! Its a Beautiful day!
Once again things have turned around for the better. A second reading in the room is showing mainly .5 readings with slightly above or below in some areas. The small bed in that room, pings occasionally around the frame which is metal so that will be replaced with a wood one. It looks like I made a mistake when I reported the 2-3 mG readings here but I'll check it for the 3rd time or 4th. My explanation for this mistake in reporting is, it had been a long day and I was tired. I searched my mind for the readings I had taken earlier, knew the dial registered 2 to 3 lines and I said 2-3 mG here. I had also turned off the sound on the meter which would have alerted me to a high field. Its embarrassing really and I created drama where it didn't need to be. My apologizes to those here for my spaced out reporting. I really must be more careful with these things. I did receive help and support from a few others. The man doing the work is more knowledgeable and open then I thought and my daughters father got involved as well. Its good to have others involved and shows the great benefits of networking and not trying to do all by myself (my tendency). What I've learned is being passed around and others are now looking at their homes in new ways.
The water heater has no wires going to it because its gas. Things are looking up once again and many things have been learned. One being, my tendency to become paranoid over protecting these children.
Looking closely at the GreenWave meters now which will be a very good investment for this small, old home with kids.
Thank you Everyone! Its a Beautiful day!
