i saw you mentioned using ozone to sterilize the chamber, i don't know how those are built but we know that ozone doesn't react well with rubbers/seals(like those used for high pressure vessels) or some soft materials so better check it out to avoid damaging something
I'm a little slow in responding. Sorry. I asked Tommy at Oxyrevo some questions and he got back to me.
My questions:
1) It was mentioned that the temperature of the room should be around 19-20 C, and that if it is warmer than this, to use an air conditioner to cool the room. What is the reason for this? Is it for my personal comfort while in the chamber, or is it to help cool the machines? Do the machines have an emergency shut off if they get too hot?
2) I use an ozone generator sometimes to disinfect a room. A person on the forum mentioned the use of an ozone generator to not be a good idea since the ozone could damage the seals of the chamber. Is an ozone generator safe to use in the same room as the hbot?
3) Can direct sunlight affect the chamber in any way?
Tommy's responses:
1. The purpose to turn on the room AC when room temerature is warm is for yourself better comfortable using inside of your chamber.
As the temperature inside of the chamber is related to the temperature in your room.
This advice nothing to do for the machines.
Thanks for this reminding requestion, we will improve the writing in the user manauls.
2.There has no literature to say Ozone could damage the chamber capsule or not specificly, but better not use it if we have no idea if it is suitable to use.
For disinfection solution, we have an anti-virus generator which use water nano technology, however it is only availbale to install in the Pro version with all-in-one machine.
My personal experience is as long as you keep your chamber room dry, clean and with fresh and better air circulation, then it will be fine.
3.Better to put the chamer in place where no direct sunlight for longer lifespan and comfortable using experience.