broken.english
Jedi Council Member
I have seen 1.2, 1.6 and 1.8 coils. Most are made of Kanthal wire which contains aluminum.
May I ask if you really wish to have a Nautilus tank?
E-cigarettes: research - experiments - ideas
- Thread starter broken.english
- Start date
I have seen 1.2, 1.6 and 1.8 coils. Most are made of Kanthal wire which contains aluminum.
May I ask if you really wish to have a Nautilus tank?
I don’t know, the above sounds like you don’t think this a good system … I was just following 987baz’s lead. I am fairly new to vaping and as yet not entirely convinced it fits my needs, but I am happy to experiment further.
At the moment I have a Vaporesso Luxe with 1.2 ohm pods, but I don’t particularly like the flattish mouthpiece of the pods - I’d rather have a round mouthpiece, a bit similar to a real cig. And I wouldn’t mind being able to do my own coils - eventually, and if I stick to vaping. So far I haven’t found a mix that is at the same time pleasant and not causing me to cough (I use commercial juice 50/50 PG/VG, but I have ordered stuff to customise it in any way I want).
Other than that, I am not attached to any brand or pod system, apart from the fact that Oz is a small market with limited range.
broken.english
Jedi Council Member
These are available in various lengths and diameters. They are called drip tips.
Good, in this case you can use ss 316l wire. Dirt cheep. I will write a tutorial in the not too distant future.
It should be possible to make a nic salt according to your needs. I guess that malic acid could be suitable for you.
Unfortunately there is no solution yet. What I have been thinking about is that there are small rebuildable atomizers that could be dissembled and sent in parts. Just as an idea..
If you go down the page and click on coil types, it shows this
I have attached a screenshot from what I get - these coils are available in the specs, but above in the ordering section I get only this:
To me that sounds like it is available from the manufacturer, but not in Oz ….?
correct, those are the only ones availabe atm, but I spoke to the guy at pharmacyworld and he said they will get their order from them in a few weeks and will email as soonm as they do. I vape .8ohm at 16w atm so using a .7ohm should be close, but I would like to try the 1.2. From what he told me, the tank has a better restriction on it, giving a tighter draw than the Luxe and better air flow. And I agree that the luxe mouth piece is a bit off putting.
It also says on the aspire website that the 3s tank is compatible with all Nautilus series coils link
It's pretty much the only option we have here atm for MTL tanks, that should change with time, and having the mod alredy will mean it's just a matter of getting a new tank when they become available. Apparently the innokin tanks are great but we don't have access to them yet .. but they are on the TGA approved list, so they will eventually stock them ..
here's a link to the TGA approved list link
edit: added TGA list
Last edited:
FWIW I also have an Aspire pocketx (same company as the Nautilus) and it comes with .6coils in it and it's about the same as the Luxe with a 1.2 in it IMO.. it has a driptip mouth piece like the Nautilus tank so I assume that makes a difference!? It's what is called a AIO (all in one) so it looks like a mod and tank but it's not, and there are no settings you can adjust, i like it, but it's very limited, and meant for new vapers and technophobes mainly 
broken.english
Jedi Council Member
What is great are the Innokin batteries, namely Apex (22mm) and EZ tube(25 mm). Excellent for rebuildable atomizers. Light weight, 3 clicks on/off, adjustable voltage/wattage, USB C charging. The EZ has 90 mm length and is a bit of a prick but still better than many others.
The tanks are not that great from my perspective. They have bottom airflow from which they will leak one day. The drip tip is 2-3 mm too short. Built in coil has 0.8 ohm. However, in Oz...
Oh that’s right it was the easy tube that was recommended … maybe flshgordon? I will keep an eye out for new additions, the guys at the pharmacy said he will let me know when they get new stock as it arrives that might suit my needs .. but yeah for now I think the nautilus and the armour s are the best I can do .. thanks for the info brokenenglish
broken.english
Jedi Council Member
I checked the list.It contains quite some Innokin products, a good sign.
What is a bit strange is that nowhere in the text it mentions batteries resp. battery mods. Is there maybe a small chance that they are not regulated??
The draw on the Nautilus tank is MUCH tighter than the Luxe, in fact than all of the Vaporesso units. Very much feels like a smoke. I bought on just the other day for this very reason
Have never used a vaporizer, yet I'm looking at this method for Nicotine delivery.
Today, while busy looking at propylene Glycol (use in so many types of processes), had noticed a FAQ from a big manufacture of PG. Generally, the big manufactures cater to the stream of industries below or to the side as other manufactures have different uses, and then down stream until it hits the commercial markets, hence a vaporizing medium. I don't know what these mediums say about it, yet it seems odd to me to make use of it in a respiratory product.
So, a large manufacture's FAQ had this mention of their PG, so just posting it here - the do not support its use:
broken.english
Jedi Council Member
A warm welcome, Voyageur!
