EMF Exposure

[trendsetter37]

What do you think about testing the house yourself using a Trifield 100XE EMF reader and also plugging into outlets with a Greenwave Broadband EMI Meter?

Years ago I bought a cheap gauss meter branded CellSensor, and now I wish I had just spent extra for the Trifield.

I'm not opposed to that at all and will most likely end up going that route. Just wondered if having a professional do it conveyed some extra recourse with negotiations. Will keep you posted though. Thanks for the model suggestion!

 

[Ca.]

Can you provide more details about the sense and significance of 'polarized' and 'non-polarized' radiations?

Here's a fairly good article from Nature Publishing Group.

Polarization: A Key Difference between Man-made and Natural Electromagnetic Fields, in regard to Biological Activity
Dated Published online 2015 Oct 12.
Unpolarized electromagnetic radiation can become polarized when it .... same frequency but have different polarizations meaning that their electric vectors ..... Tuor et al. measured ELF magnetic fields from cell phones on the ..

The abstract should give you clue. The body of the article is quite more technical though.
Also some related related links

 

[anartist]

I'm not opposed to that at all and will most likely end up going that route. Just wondered if having a professional do it conveyed some extra recourse with negotiations. Will keep you posted though. Thanks for the model suggestion!

I would not reccomend the tri-field. it's OK, but the cornet meter is better, and the ED88T is good all round Cornet meters
They have come out with a ED88TPlus, which includes USB connection to a computer for the purpose of data logging. Don't know how usefull that would be to you.
Operation mode: Tri-mode of operation
- (RF mode): High frequency RF Broadband
- (Gauss mode): Low frequency Magnetic field
- (Electric Field mode): Low frequency Electric field
Frequency range & sensitivity:
- RF mode: 100MHz to 8.0GHz
-60dBm to +5dBm, 14mv/m-26v/m, 0.5uw/m-sq to 1.8 w/m-sq
- Gauss mode: (1)50Hz to 10KHz (0.1uT to 50uT)/ (1mG to 500mG)(2)50Hz to 1KHz (0.01uT to 1uT)/ (0.1mG to 10mG)
- Electric field mode: 50Hz - 10KHz (10v/m to 1000v/m)
Frequency Display: 100MHz to 2.7GHz
Signal : Analog RF(AM/FM) and high speed digital burst RF, GSM,TDMA,CDMA,PCS,Wi-Fi 2.4GH, 5.8GHz,
3.6GHz WiMAX, 3 - 6GHz Ultra-Wide-band, 3G, 4G , AC smart meter. AC high voltage power line, Transformer, Motor, Appliance EMF.
Display mode: dBm, mW/m2, V/m, uT, mGauss, MHz
Display: Graphics LCD multi-digit power level display, moving Histogram, level bar display, color LED segment.
Function: RF power level, LF magnetic field strength, Electric Field strength, signal frequency, Hold, MAX, Peak Average,
Average, Sound output, audio Alarm, custom LED level
I also have a Tri-Field 100XE but it is not as accurate, and doesn't cover the same electromagnetic territory.

• Detects the three types of electromagnetic pollution: AC magnetic fields, AC electric fields, and radio/microwaves.
• AC magnetic and electric fields are 3-axis, allowing quick accurate readings regardless of meter orientation.
• Two magnetic ranges cover 0.2 – 100 milligauss.
• This is sufficiently sensitive to detect the background field almost anywhere (except far from civilization), while measuring up to very strong AC fields.
• Electric range covers 5-1000 V/m (or 0.5 – 100 kV/m with original version of the TriField Meter)
• Radio/microwave covers 10 to 1000 microwatts/square cm which includes the maximum permissible public exposure levels in all countries.
• Operates about 40 hours on replaceable standard 9V battery, has a low battery indicator.
• Analog (needle-type) display has very fast response time compared to digital.

 

[goyacobol]

Can you provide more details about the sense and significance of 'polarized' and 'non-polarized' radiations? What do they do to us? I have heard about certain beings who are 'food for the moon', though I don't have a good grasp of the concept yet, just an inkling.

This is coming at a pressing time. Certain of my friends are considering going to a 'moon dance' ceremony, and I suspect they are walking into a New Age honey trap. Any and all information on this would be very welcome.

iamthatis,

In addition to the excellent technical suggestions others have offered. I think much of this frequency issue is the realization that our "containers" and our container antennae which are physical are in essence under attack.

Why would this be? I think it is because our chosen containers (think reincarnation and the terms of our agreement to be here) are the means of expression for our souls.

If you are familiar with the Cs descriptions of 4D STS then maybe you can see this as a battle to control us now in 3D and later in 4D.

The soul is something that Laura has researched in many places and teachings. One of those schools (The 4th Way) was taught by Gurdjieff and his students and followers were many. One of his adherents was Boris Mouravieff.

Session 13 July 2002:

Q: We have recently been working with some material from Boris Mouravieff. We can see many relationships between that work and so many of the clues and hints scattered throughout the C's transmissions. What seems to be important is his information about the Centers - three lower and three higher that are not "seated" in the body. Then, he talks about the difference between "A" influences and "B" influences, and the necessity for assimilation of "B" influences in order to fuse the "magnetic center" which then enables the soul - or higher centers - to "seat" in the body. Is the information from Mouravieff about these matters fairly accurate?

A: Not just fairly. It has been preserved from the time of the "Fall."

I think this frequency interference we are attempting to mitigate could be a very damaging factor for any of us trying to develop or seat the "higher centers".

Since you mentioned "food for the moon" I thought this might help.

As far as the 'moon dance' being "New Age honey trap" I think it depends on the knowledge and intention that group has about why they are doing the dance. The Cs say "No ritual" because "rituals constrict".

If the "moon dance" is not done as a ritual but with a knowledgeable and specific purpose and intention then I think that may be something very different. Also "moon dance" is vague. The Cs suggest a "moon dance" at "once a month... Dark of the moon".

What I am going to post may need to be repeated in other threads but you bring up what I think may be important "as needed".

Session 16 July 2009"

Q: (L) Okay, the Maruts were referred to as - they were like all of a special bloodline - and they danced, and their dance produced benefits for the tribe. I mean, the heavens opened, and baskets came down with food and whatever they needed. I mean, it's like the original story of Manna from heaven. Only it wasn't just something tasteless, it was whatever they wanted or needed. Krunchy (healthy cereal)! (laughter)

A: Keep in mind that in order for the techno-spiritual techniques to work, the people of the "blood" must be purified and their chakras must be "connected". If this is done, there are even more important functions. For example: mental blocking of 4D STS attacks. Do you realize that 200 or so people assembled this way, and a block against the marauders could be put in place? Furthermore the wave is coming, the "dancers" could very well determine how it affects your planet and reality. Can you imagine what would happen if the "elite" of your world were cut off from their 4D STS power supply? What if their mind control techniques and frequency fences just "fizzled"?

Q: (L) Well that's crazy. (Ark) How can it happen that they are cut off from their power supply? I don't understand.

A: Mental blocking.

Q: (DD) Do they block themselves? (Review of previous answer) (A***) So they're talking about the dance, and people together doing this dance would create some sort of block?

A: Exactly.

Q: (A***) That's a good reason to learn to dance! (Ark) Well, how long would you have to dance to keep the block going long enough?

A: You create it with the dance, chant, musical induced state, and then just add power as needed.

Q: (S) We just run some extension cords, and... (laughter) (L) But how often do you add power?

A: With the current imbalance, about once a week. Later, as the balance is restored, it can be once a month... Dark of the moon.

Q: (S) What did they mean by "add power"? (L) Do it again. (P) Is it a special day of the week? (L) Well, they said once a month, dark of the moon... Oh, you want to know if it's once a week, then which day?

A: Moon-day.

 

[iamthatis]

iamthatis,

In addition to the excellent technical suggestions others have offered. I think much of this frequency issue is the realization that our "containers" and our container antennae which are physical are in essence under attack.

Why would this be? I think it is because our chosen containers (think reincarnation and the terms of our agreement to be here) are the means of expression for our souls.

If you are familiar with the Cs descriptions of 4D STS then maybe you can see this as a battle to control us now in 3D and later in 4D.

The soul is something that Laura has researched in many places and teachings. One of those schools (The 4th Way) was taught by Gurdjieff and his students and followers were many. One of his adherents was Boris Mouravieff.

Session 13 July 2002:


I think this frequency interference we are attempting to mitigate could be a very damaging factor for any of us trying to develop or seat the "higher centers".

Since you mentioned "food for the moon" I thought this might help.

As far as the 'moon dance' being "New Age honey trap" I think it depends on the knowledge and intention that group has about why they are doing the dance. The Cs say "No ritual" because "rituals constrict".

If the "moon dance" is not done as a ritual but with a knowledgeable and specific purpose and intention then I think that may be something very different. Also "moon dance" is vague. The Cs suggest a "moon dance" at "once a month... Dark of the moon".

What I am going to post may need to be repeated in other threads but you bring up what I think may be important "as needed".

Session 16 July 2009"

Thank you for this re-minder. I'm getting through Beelzebub's Tales, have read a good deal of The Wave series, and some Ouspensky. I am in the process of getting into right relationship with these pointings. The 'A influences' and 'B influences' had slipped from my awareness. Again, thanks.

The C's session you quotes re: 'moon dancing' is also a good touchstone with regards to this upcoming dance. I remember hearing that they are dancing in the full moon. I will peruse the literature and see if I can elucidate the EMF implications of a full moon dance. Full-on polarized light? I remember the C's saying full moons are akin an opening of the moon's 'retaurant'. I'll have to search the C's archives on that.

I appreciate what you say also about ritual. I distinguish ritual from ceremony. 'Ceremony' sharing the same root as 'cerebral' - the good use of heart-intention and the thought centre to be open to receive 'B influences'. As Lao Tzu said,

When the Tao is lost, there is goodness.
When goodness is lost, there is morality.
When morality is lost, there is ritual.
Ritual is the husk of true faith,
the beginning of chaos.

 

[nature]

Here's a fairly good article from Nature Publishing Group.

Polarization: A Key Difference between Man-made and Natural Electromagnetic Fields, in regard to Biological Activity
Dated Published online 2015 Oct 12.
Unpolarized electromagnetic radiation can become polarized when it .... same frequency but have different polarizations meaning that their electric vectors ..... Tuor et al. measured ELF magnetic fields from cell phones on the ..

The abstract should give you clue. The body of the article is quite more technical though.
Also some related related links

Thank you ca. It makes me understand polarized vs unpolarized, by analogy to what happens in biochemistry: dextrogyre vs levogyre: one is a natural form and the other is artificially produced and with side effects.

 

[Ca.]

https://twitter.com/x/status/1127106061335326720

5G Health Concerns Raised By Pepeʻekeo Resident (May 2, 2019)

HILO, Hawaiʻi - As it voted to approve a new Verizon tower in Puna, the Windward Planning Commission heard public testimony from a resident worried about the impacts of a tower in his community.

 

[neonix]

Are there any suggestions for getting a home EMF inspection before moving in? I've done a cursory check online and can't seem to find professionals in my area. I'm thinking that I'll just buy a meter off amazon and check myself, however not sure how actionable my findings will be if we find something since i'm not a "professional".

The cheapest solution is to move in for 2 day and check how you sleep. If that's not possible you can also wander around in the neighborhood for some time and see how you feel. You can also use your mobile phone to check how many WiFi routers are all around.

The real problem with artificially-generated electromagnetic radiation of any magnitude is that it's polarized (like moonlight) while naturally-occurring cosmic radiation is not polarized (like sunlight). Even at extremely low levels and irregardless of frequency, intracellular ionic functions become disrupted through entrainment, leading to a whole laundry list of diseases and conditions.

Does this means moderated sunlight exposure can be beneficial for our body and mind? I often expose myself on the sun to renew a vitamin D. But I find out that it also relax me.

Town Hall Meeting - "5th Generation Wireless"
www.youtube.com/watch?v=inN-YhUMMyI

"5th Generation Wireless: How Do Changes in Federal and State Policies Impact Local Gov Control and our Neighborhoods." Tucson Arizona. March 25 2019. Presentations by Magda Havas PhD, Elizabeth Kelly and Staff from City of Tucson and Pima County

 

[ReasonBear]

Are there any suggestions for getting a home EMF inspection before moving in? I've done a cursory check online and can't seem to find professionals in my area. I'm thinking that I'll just buy a meter off amazon and check myself, however not sure how actionable my findings will be if we find something since i'm not a "professional".

That's very thoughtful. I can assure you there will be actionable data. Either the Cornet 88T PLUS or the Tri-Field meter are recommended. They both detect wide frequency bands, and they both detect the magnetic component of EMFs at household current frequencies. Both meters are under $200.

The BauBiologie Institute publishes recommended 'safe' levels. Here's a link to their data sheet for sleeping areas:

https://slt.co/Downloads/Education/EMF-Exposure-Guidelines-For-Sleeping-Areas.pdf

The Cornet meter is actually labelled according to these standards.

 

[trendsetter37]

Update: I bought the TriField TF2 meter and I've been playing around with it at our current place to get the hang of it. So far it's not as bad as I thought it was going to be, but there's one caveat. Microwave ovens throw off massive radiation OUTSIDE of the supposed container of operation.

I say massive because most things that emit a magnetic or electric fields abate when you move away. However, when the microwave is on and I switch to the RF detector, I get high readings all over the house that are caused simply because the microwave is operating! Also, it appears that the metal screen in the front, that allows one to see the food being cooked, does nothing

I always thought our microwave was fairly adequate because I could not get a cell signal when placing a phone inside; rationale being it's stopping the microwaves from the phone and hence does a good job at containing endogenous radiation. Guess that's not entirely true

 

[hlat]

I say massive because most things that emit a magnetic or electric fields abate when you move away. However, when the microwave is on and I switch to the RF detector, I get high readings all over the house that are caused simply because the microwave is operating! Also, it appears that the metal screen in the front, that allows one to see the food being cooked, does nothing

Maybe get rid of the microwave? I haven't had one in more than a decade, as we use the stove or toaster oven instead.

 

[Goemon_]

There is a french guy who recommends this type of filter (link) to be installed between the smart meter and the panel. He talks about it on his website (link).
He has done tests before and after the installation of the smart meter, with and without the filter.
He measured the frequency spectrum. There are graphs of the measures in the first video of his above mentioned website.

He was interviewed by another french guy (link). I think he said that it doesn't matter if you have a smart meter or not, because if some of your neighbors have a smart meter the CPL will come into your house anyway.

I would like to know what the specialists among us thinks about it.

 

[monotonic]

I always thought our microwave was fairly adequate because I could not get a cell signal when placing a phone inside; rationale being it's stopping the microwaves from the phone and hence does a good job at containing endogenous radiation. Guess that's not entirely true

Well if it's a 1300W microwave, and the shielding is 99%, then you are still getting 13W leakage. The problem is the sheer amount of power being dumped into the enclosure, far more than a cellphone. Maybe you can put it into a cupboard lined with foil?

 

[ReasonBear]

when the microwave is on and I switch to the RF detector, I get high readings all over the house

That's dirty electricity caused by the microwave's transformer. It's feeding back into the house wiring and radiating from all of them. Smart meters are notorious for this. Many appliances will cause it to happen. My electric kettle is worse than my microwave. This video is long, but it's full of useful information.

 

[ReasonBear]

if some of your neighbors have a smart meter the CPL will come into your house anyway.

Fact - all houses are connected to Earth via water pipes and wires, which means they're all attached to each other. Grounding to Earth is good for bleeding off unwanted currents and signals, but it corrupts the Earth in the process.

I've seen the most ridiculous 'solutions' for smart meters online! Those who place an empty paint can over the meter's face are concentrating and reflecting the signal back into their own home! This kind of 'advise' should be prosecuted as fraud resulting in bodily harm.